Stainless steel chase covers
A stainless cover holds up to weather for many years without needing paint.
A rusted or leaking chase cover in Wanaque can be replaced with a custom stainless steel or copper cover sized to the chase and shaped to shed water off the edges. Dial (862) 355-2009 to talk with a local chimney pro about your chase.
Homes with prefab fireplaces often have a chimney chase, which is a framed box around the metal flue pipe. The top of the chase is sealed with a metal chase cover that has an opening for the flue pipe. Its job is to keep water out of the framing and away from the fireplace below.
The cover that comes with most homes is a thin galvanized pan, frequently with no slope at all. Flat covers hold standing water, and galvanized steel rusts once the coating wears, which leaves brown streaks down the siding and eventually holes in the pan. Rust running down the chase is usually the first clue.
Once water gets in, it can travel down the chase and into the fireplace. Over time it leads to rot in the framing, rust on the fireplace and mold in damp areas. The sooner the cover is replaced, the less damage there is to fix.
Many chase cover replacement calls in Wanaque also turn up a need for chimney cap installation or chimney leak repair.
Dealing with this in Wanaque, NJ right now? Call (862) 355-2009 and describe the problem to a chimney sweep who works in Wanaque.
Call nowHere is how a sweep usually handles a chase cover replacement.
The sweep checks the old cover, the storm collar, the cap and the siding near the top. Soft wood under the cover is a sign of a longer leak.
The chase top is measured, along with the flue opening and its position. A good fit matters more than anything else.
The cap and old cover are removed carefully so the flue pipe is not disturbed. This is the best time to look for rot.
The new cover goes on with a slope or cross break so water runs off, and a drip edge that sheds water away from the siding. It is fastened through the skirt, not through the top.
The storm collar is sealed around the flue pipe and the chimney cap is reinstalled or replaced. The finished top is checked for gaps.
A stainless cover holds up to weather for many years without needing paint.
A hemmed drip edge on the skirt kicks water away from the siding instead of soaking into it.
A new storm collar and cap finish the top so water cannot run down the flue pipe.
Copper is a long lasting option for homes where looks matter.
Covers are made with a slope, cross break or raised center so water runs off and keep the cover drier.
Chase repair goes hand in hand with replacing a cover that has been leaking. The work may include new framing, new sheathing, siding repairs and drying or replacing insulation. Leaks can come from the roof line as well, so the flashing gets a look.
Calling (862) 355-2009 from Wanaque with details about stains or leaks helps the sweep plan the visit. Some chase repairs need carpentry, so ask how that work is handled. The new cover should go on a sound chase.
Around Wanaque, flat galvanized chase covers are a common source of leaks and rust stains. From Wanaque out to neighboring towns like Bloomingdale, Oakland, Pompton Lakes and Pines Lake, sweeps regularly find rusted chase tops on homes that are only a decade or two old, which is why a chase cover is worth checking when the chimney is swept.
Need chase cover replacement around Wanaque? Call (862) 355-2009 for a Wanaque chimney sweep who serves the towns around it too.
Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. Masonry takes the worst of it from the freeze and thaw cycle: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. That is why chimney cleaning in Wanaque is usually booked in the fall, before the first cold night.
A chimney problem fixed early rarely spreads to the masonry, the liner or the house.
Local sweeps see the same chimney types and weather wear across Wanaque and nearby towns.
Ask the sweep about the cause, the options and the estimate before work starts.
More questions? Call (862) 355-2009
Putting a sturdy cap on top of the chimney sized to the flue tile or the whole crown.
Learn moreStopping chimney leaks at the source, whether the drip shows up in the attic, the ceiling or the firebox.
Learn moreTreating chimney brick and mortar with a breathable water repellent, to slow freeze-thaw damage and spalling.
Learn moreChimney repairs from the cap and crown down to the firebox, matched to what an inspection actually finds.
Learn moreLooking for something else?
See all chimney servicesCall (862) 355-2009 to talk to a chimney sweep serving Wanaque, NJ.
Free to call. No forms to fill out.